Apple iPhone 16 Pro Max Back Battery Door with Camera Lens Glass - Gold

About this product

This is a replacement rear battery door and camera lens glass panel made specifically for the Apple iPhone 16 Pro Max, built to match the phone's titanium frame with textured matte glass back. It is intended for repair situations where the original back glass is cracked, the camera lens glass is scratched, or a technician needs to reseal the rear housing after opening the device for a battery swap. The panel carries pre-cut openings for the phone's triple 48MP + 48MP + 12MP rear camera array and is dimensioned to the iPhone 16 Pro Max's 163.0 x 77.6 x 8.25mm chassis, so it closes flush against the titanium mid-frame rather than sitting proud or requiring trimming on installation. Because the device supports MagSafe, the internal magnet ring position on this panel is placed to keep charger and accessory alignment working after the swap.

• Camera cutouts sized for the 48MP + 48MP + 12MP triple rear camera array
• Charging port opening cut for the USB-C port, not Lightning
• Button openings positioned for the Camera Control button and Action button
• Panel footprint matched to the 163.0 x 77.6 x 8.25mm titanium chassis and 227g weight class
• Gold finish glass, supplied as a full battery-door replacement, not a snap-on shell

How it fits your Apple iPhone 16 Pro Max

Because the iPhone 16 Pro Max's rear panel is structural, not a separate cover, this battery door is cut and drilled to the same 163.0 x 77.6 x 8.25mm envelope and 227g weight class as the original titanium-and-glass back, so once installed it sits level with the stainless steel camera bump rather than creating a lip around it. The triple-lens cutout is spaced for the 48MP main, 48MP ultra-wide, and 12MP telephoto housing, and the smaller cutouts line up with the Camera Control button and Action button rather than blocking them. The USB-C charging port opening is positioned at the base edge to match the original port location, and the internal ring at the panel's center is placed to keep MagSafe alignment intact. What this panel cannot do on its own is restore the phone's IP68 water resistance rating — that seal depends on the correct adhesive gasket and a clean, properly torqued reassembly, which is why this class of part is meant for a technician's bench rather than a five-minute DIY swap, and it has no bearing on the front Ceramic Shield display, which is a separate part.

What you should know

This listing covers the Apple iPhone 16 Pro Max only — it does not fit the iPhone 16 Pro (smaller 6.3-inch chassis), the iPhone 16 or 16 Plus (different camera housing and dimensions), or the iPhone 15 Pro Max (different camera bump profile). The Gold finish shown here is an aftermarket color option and is not one of Apple's four factory Titanium finishes (Black Titanium, White Titanium, Natural Titanium, Desert Titanium), so expect the tone and texture to read differently from an original panel next to it. This is a structural repair part, not a protective case: it replaces the back glass and camera lens covering but does not add drop cushioning beyond what the original panel offered, and it will not disguise a bent frame or damaged camera bracket underneath. Fitting it requires opening the phone's chassis, disconnecting the battery, and resealing the housing, so we recommend professional installation by a qualified repair technician rather than a first-time DIY attempt — opening the device yourself will void any remaining Apple warranty, and improper resealing can compromise the IP68 rating the phone shipped with.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items, and delivers this part across Pakistan. This listing states the exact device it is cut for and the specifications it was checked against, so you can confirm compatibility before you or your technician opens the phone.