Infinix Hot 11s Rear Back Door Housing Replacement - Black, Verified Fit

About this product

This is a replacement rear back door (battery back cover) for the Infinix Hot 11s, built to close over the phone's 5000mAh battery compartment once the original housing is cracked, scratched, or removed for a repair. The Hot 11s ships with a plastic back and plastic frame, and this back door is molded to match that same plastic-on-plastic construction so the panel seats flush against the 168.7 x 76.5 x 8.8mm frame without gaps at the seams. It's finished in solid black, and the cutout for the rear camera module is positioned for the Hot 11s's 50MP + 2MP + AI lens array, so the lens ring, sensor windows, and flash line up the way they do on the factory panel.

• Molded to the Hot 11s's exact 168.7 x 76.5 x 8.8mm body profile
• Camera cutout matched to the 50MP + 2MP + AI lens rear camera layout
• Plastic construction matching the device's plastic back and plastic frame
• Covers the full battery compartment housing the 5000mAh cell
• Snap-fit edges designed for the same frame that holds the micro-USB port and headphone jack
• Solid black finish with no cutout misalignment around the flash or camera ring

How it fits your Infinix Hot 11s

Because the Hot 11s weighs 196g and carries most of that mass in its 5000mAh battery, the back door has a noticeable but not excessive heft in hand once separated from the phone — it's a full structural panel, not a thin cosmetic shell. The camera cutout is cut specifically for the 50MP + 2MP + AI triple-element layout, so the lens bezel and flash sit centered rather than off-axis, which is the most common failure point on generic back doors. The micro-USB charging port and the 3.5mm headphone jack are both housed in the device's frame rather than the back door itself, so neither is covered or obstructed by this panel — the door simply closes around them. The edges are shaped to the same plastic frame that runs the 90Hz, 6.78-inch display's chassis, so the fit is tight enough to keep dust out of the battery compartment without needing extra adhesive at the seams.

What you should know

This back door is made for the Infinix Hot 11s (2021) only — it is not compatible with the Hot 11, Hot 11 Play, Hot 11i, or Hot 12 series, since those models use different dimensions and camera cutout positions even though the names look similar. It is a structural and cosmetic housing replacement: it restores the outer shell and battery compartment cover, but it does not include the battery, the camera lens glass, or any internal flex cables — those remain the original components from your device. Infinix's Hot 11s color lineup is 7 Degree Purple, Polar Black, and Green Wave; this listing is a plain black finish intended as a functional replacement rather than an exact factory color match. Because installing this back door means opening the device and exposing the 5000mAh battery compartment, we recommend professional installation — prying open the original housing can strain battery connectors or frame clips, and doing this yourself may affect any remaining device warranty.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items, and this listing (SKU casing-00344) is checked against the Hot 11s's actual camera and frame dimensions before it goes live. We deliver across Pakistan, so you can order this back door and have it ready before you take your phone in for a housing swap.