Infinix Smart 10 Plus Full Body Housing Replacement - Blue, Verified Fit

About this product

This is a full body housing replacement for the Infinix Smart 10 Plus, covering the middle frame, back door, side buttons, and rear camera lens cover in Blue. The Smart 10 Plus ships from the factory with a plastic back and frame across a 168.5 x 76.4 x 8.9mm shell weighing 205g, and this housing is molded to the same dimensions so it can replace a cracked back door or bent middle frame without altering the phone's footprint. The rear cutout is shaped for the 13MP + AI lens camera module, and the lower edge carries a USB-C port opening matched to the device's charging port. Because the Smart 10 Plus carries an IP54 splash resistance rating, the back door's seal line is cut to sit flush against the frame the way the original panel does.

• Middle frame sized for the 168.5 x 76.4 x 8.9mm chassis
• Back door panel finished in Blue with a rear lens cutout for the 13MP + AI lens camera
• Pre-fitted power and volume buttons matched to the frame's button wells
• USB-C charging port cutout at the base of the frame
• Panel seams cut to align with the device's IP54 splash-resistant back door fit
• Built for the plastic back-and-frame construction used on this model

How it fits your Infinix Smart 10 Plus

Handled against the original panel, the middle frame tracks the Smart 10 Plus's 168.5 x 76.4 x 8.9mm profile closely enough that the 6.82-inch IPS LCD display seats into the frame lip without gaps at the edges, which matters on a screen this size where a loose frame shows as a visible step under the glass. The rear lens ring is cut for the 13MP + AI lens array as fitted on this model, so the lens sits centered rather than off-axis. The button wells for power and volume are pre-positioned to the frame, and they give the same click resistance you'd expect on a 205g plastic-bodied phone once the buttons are seated and the retaining screws are back in place. Because this device has no wireless charging coil, the back door has no cutout or coil recess to worry about, and the USB-C port opening at the base lines up with the board-mounted port when the frame is closed around it.

What you should know

This housing is verified to fit the Infinix Smart 10 Plus only — it is not sized for the Infinix Smart 10, Smart 10 Pro, Smart 9, or any other Infinix Smart-series phone, even where model numbers look similar. Blue is not one of the Smart 10 Plus's original factory colors (Infinix ships this model in Meadow Green, Obsidian Black, and Starlight White), so treat this as an aftermarket color option rather than a color-matched replacement for a stock unit. This is a structural housing shell only: it does not include the screen, battery, motherboard, or camera sensor, and fitting it means transferring your existing internals across from the old housing. Because that involves opening the device and reseating internal components, we recommend professional installation rather than a DIY swap, and you should assume that opening the phone yourself may affect any remaining manufacturer warranty.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled housing kits, and we ship this listing nationwide across Pakistan. Specifications on this page are checked against the Infinix Smart 10 Plus's published dimensions and camera layout before listing, so what you install is what's described here.