Infinix Smart 7 Rear Back Body Housing Replacement Door, White – Verified Fit

About this product

This is a replacement rear back body casing for the Infinix Smart 7, a plastic-back-and-frame device released in 2023 with a 6.60-inch IPS LCD display and a 5000mAh battery sealed behind the rear housing. If your Smart 7's original back door is cracked, scratched through, or has lost its side buttons, this White replacement panel restores the phone's structure and closes the battery compartment the way the factory housing did. It is molded to the device's 163.8 x 75.5 x 8.5mm frame and matches the 184g weight profile of the original panel, so it does not add bulk or throw off the phone's balance in hand. The panel ships pre-fitted with side buttons, so you are replacing the power and volume assembly along with the shell in one part.

• Cutout aligned to the Smart 7's single 13MP rear camera module
• Port opening sized for the device's Micro-USB charging port, not USB-C
• Pre-installed side buttons for power and volume, matched to the 8.5mm frame depth
• Panel dimensions built to the 163.8 x 75.5mm body of the Smart 7
• Weight matched close to the original 184g back door for balanced hand feel
• Cutout allowance for the device's headphone jack

How it fits your Infinix Smart 7

Because this housing is built off the Smart 7's own 163.8 x 75.5 x 8.5mm frame, the edges seat flush against the plastic mid-frame without gaps at the corners, and the camera cutout lines up directly with the 13MP rear lens so the module sits centered rather than off-axis. The charging cutout is cut for Micro-USB, matching the Smart 7's charging port and 10W charging spec exactly, so it will not fit a USB-C housing from a newer Infinix model. The pre-fitted side buttons click through the panel at the same travel distance as the stock housing, so power and volume response should feel the same as before the swap. The 6.60-inch IPS LCD front display is untouched by this replacement since it only covers the rear body, and the panel does not alter or add any water or dust resistance beyond what the phone shipped with, since none is listed for this model.

What you should know

This White back door is verified for the Infinix Smart 7 only, released in 2023 with MediaTek Helio A22 hardware; it is not built for the Smart 6, Smart 7 HD, Smart 7 Plus, or any Note-series Infinix, since port placement and frame tolerances differ across those models. The Smart 7 officially ships in Peacock Blue, Polar Black, Emerald Green, or Amazon Blue, so White is an aftermarket replacement finish rather than a factory-matched color; expect a close but not laser-matched tone against original trim like the camera ring. This is a structural and cosmetic replacement panel, not a bumper case or shock-rated cover, so it restores the phone's shell and battery seal rather than adding drop protection. Fitting it means opening the phone and exposing the 5000mAh battery and internal connectors, so we recommend professional installation, and note that opening the device may affect any remaining manufacturer warranty on your unit.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items if the fit or color isn't right, and we ship this Smart 7 back panel across Pakistan. This listing is checked against the Smart 7's own published dimensions, camera and port specs before going live, so what you see here is what the part is built to match.