iTel P65 HD Plus Tempered Glass Screen Protector – Verified Fit

About this product

The iTel P65 OG Glass Protector HD Plus is a tempered glass screen protector cut specifically for the iTel P65's 6.6-inch IPS LCD display, which runs at a 1612 x 720 resolution and a 90Hz refresh rate. Because the panel refreshes at 90Hz, touch response has to pass cleanly through the glass — a protector with the wrong thickness or a loose air gap shows up immediately as lag or missed swipes, so this piece is sized to sit flush against the P65's flat display without adding a noticeable gap. The cutout at the top clears the earpiece and sensor housing, and a second cutout is aligned for the 8MP front camera, so neither is obstructed once the protector is applied. This is a front-glass protector only — it does not cover or protect the rear 13MP + 0.08MP camera module, the plastic rear body, or the sides of the phone.

• Cut to the exact profile of the iTel P65's 6.6-inch IPS LCD panel
• Clear window for the 8MP front camera and earpiece/sensor cutout
• Sized for full-screen coverage on a 163.6 x 75.4 x 8.5mm chassis
• Does not interfere with the 90Hz refresh rate or touch sampling
• Oleophobic top layer reduces fingerprint smudging on the glass surface
• Adds negligible weight to a phone that already weighs 188g

How it fits your iTel P65

Every edge of this protector is measured against the iTel P65's actual footprint — 163.6mm tall, 75.4mm wide, and 8.5mm thick — so it sits close to the bezel line without overhanging the plastic frame or lifting at the corners. The earpiece and sensor cutout at the top lines up with the P65's housing, and the front camera window is positioned for the 8MP selfie lens, so neither is blurred or blocked. Because the P65 uses an IPS LCD panel rather than a curved OLED, the display is flat edge to edge, which lets this protector sit level across the full 6.6-inch surface instead of tapering off before the edges the way a protector made for a curved screen would. It has no bearing on the USB-C charging port, the 18W charging speed, or the 5000mAh battery underneath — those are sealed inside the plastic body and unaffected by anything applied to the front glass.

What you should know

This protector is made for the iTel P65 specifically — the model with the Unisoc T606 processor, 5000mAh battery, and 6.6-inch 720p IPS LCD display listed above. It is not interchangeable with other iTel P-series or A-series phones, even ones that look similar, since screen dimensions and camera cutout positions differ between models. A screen protector like this is a scratch and light-impact layer for the glass surface; it does not protect the rear panel, the frame, or the internal display itself, and it will not prevent damage from a sharp direct strike on the edge of the phone. Installation is a simple external application and does not require opening the device, so it does not affect the manufacturer's warranty on internal components — but a poorly seated protector can trap air or dust under the glass, so if you're not confident applying it yourself, ask the retailer to fit it for you. The P65 is available in Brilliant Gold, Lake Cyan, and Alpenglow Gold; since this protector only covers the front glass and never touches the rear housing, it fits the display the same way across all three color variants.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items, so you can check the fit against your iTel P65 before applying it. We ship across Pakistan, and this listing is matched to the P65's confirmed display specifications rather than a generic universal-fit description.