OnePlus 9 Pro Verified-Fit Rear Back Body Housing Battery Door, Green

About this product

This is a replacement rear back body housing (battery back door) made specifically for the OnePlus 9 Pro, in Green. The OnePlus 9 Pro ships with a glass front and back panel bonded to an aluminum frame, at exact dimensions of 163.2 x 73.6 x 8.7mm and a weight of 197g — this replacement panel is molded to those same dimensions so it seats into the original aluminum frame without gaps or overhang. It exists for one job: replacing a back panel that is cracked, shattered, deeply scratched, or missing after a repair, without you having to source a full donor chassis.

• Camera cutout shaped for the OnePlus 9 Pro's quad rear array — 48MP main + 50MP ultra-wide + 8MP telephoto + 2MP monochrome, with the Hasselblad-branded ring
• Sized to the device's exact 163.2 x 73.6 x 8.7mm footprint so it re-mates with the aluminum mid-frame
• Color matched toward OnePlus's Green finishes (the 9 Pro launched in Pine Green and Forest Green variants)
• Glass-panel construction consistent with the phone's original glass front/back and aluminum frame build
• Cutout/window positioned for the 50W wireless charging coil that normally sits directly beneath the back glass
• Sold as a bare back panel — your aluminum frame, screen, and internals stay exactly as they are

How it fits your OnePlus 9 Pro

Because this door is molded at the OnePlus 9 Pro's own 163.2 x 73.6 x 8.7mm dimensions, the camera bump lines up flush with the quad-camera module — the 48MP+50MP+8MP+2MP array with its Hasselblad ring sits centered in the cutout the way it does from the factory. The panel installs onto the aluminum frame that holds the phone's USB-C charging port and side buttons, so neither is affected by the swap — those stay on the frame you already own. The 9 Pro's 50W wireless charging coil is normally adhered to the underside of the original back glass, so it (along with the camera lens trim) needs to be transferred across during installation rather than assumed to be built into this part. Note that the 9 Pro's IP68 water resistance rating depends on a factory-applied adhesive seal between the back glass and frame; a back-panel swap breaks that seal, and resistance to dust and water is not preserved unless the reseal is done correctly. This part addresses the back only — the 6.7-inch LTPO OLED display and its Gorilla Glass 5 layer on the front are untouched by this replacement.

What you should know

This listing covers the OnePlus 9 Pro exclusively — it is not sized for the OnePlus 9, OnePlus 9R, or OnePlus 9RT, which use different camera housing shapes and frame dimensions, so do not order this for those models. The Green finish is our closest match to OnePlus's Pine Green and Forest Green colorways, but we do not claim an exact factory Pantone match, since finish and tone can vary between production batches. This is a bare replacement housing: it does not include the battery, the wireless charging coil, the camera lens glass/trim ring, or the SIM tray — these components must be transferred from your original back panel unless a listing explicitly states otherwise. Fitting this part means opening the chassis and disconnecting the battery, which is technical work; we recommend professional installation, and note that opening the device yourself may affect any remaining manufacturer warranty and will compromise the factory IP68 seal until properly resealed. This is a structural/cosmetic replacement part, not an add-on protective case — it restores the phone's original back but does not provide extra drop or impact protection the way a bumper case would.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items, so you can check the panel against your device before fitting it. We deliver across Pakistan, and this listing is written and checked against the OnePlus 9 Pro's own published dimensions and camera layout rather than generic case-fit assumptions.