Oppo A3X 9H Rear Camera Lens Protector - Verified Fit

About this product

This is a rear camera lens protector cut specifically for the Oppo A3X (2024), a 6.67-inch IPS LCD phone built with a plastic frame and back panel and rated IP54 for splash and dust resistance. The rear panel on the A3X carries a single 8MP camera housed in its own raised module, and this protector is shaped to seal around that exact cutout rather than covering the whole back of the phone. It's a tempered glass piece rated at 9H hardness with flexible edges, so it sits flush against the curve of the plastic back instead of lifting at the corners. Because the A3X's camera bump sits proud of the back panel by design, a protector like this is one of the few ways to guard the lens glass itself without adding a full case.

• Cutout matched to the single 8MP rear camera module, not a generic multi-lens template
• 9H-rated tempered glass surface for scratch resistance on the lens area
• Flexible border designed to conform to the plastic back of the A3X
• Adhesive application, no tools or disassembly required
• Complements the phone's IP54 splash and dust resistant design by keeping grit off the lens edge
• Sized for the A3X's 164.1 x 74.9 x 7.8mm body only

How it fits your Oppo A3X

The A3X measures 164.1 x 74.9 x 7.8mm and weighs 190g, and the camera module cutout on this protector is positioned to match that exact footprint - it will not line up correctly on a phone with different dimensions or a relocated camera island. Because the A3X's body is plastic rather than glass or metal, the flexible edge of this protector grips the back panel evenly without the lifting you sometimes get on curved glass backs. The cutout is shaped around the single 8MP rear lens only; it does not extend to cover the fingerprint sensor, which on this model is side-mounted on the frame rather than on the back, so button and sensor access is unaffected. It also does not interfere with the USB-C charging port at the bottom edge, which on this device supports 45W wired charging - the port opening is left completely clear. Since the A3X has no wireless charging, there's no coil placement to account for either, which keeps the design simple around the camera area alone.

What you should know

This protector is made for the Oppo A3X specifically and is not interchangeable with other Oppo A-series phones - the camera module position, body dimensions, and back panel curve on related models differ enough that a protector cut for the A3X will not seat correctly on them. It covers and hardens the rear camera lens only; it is not a full back cover, does not protect the plastic frame or corners from drop impact, and won't prevent cracking if the phone lands directly on the camera bump from a height. Treat it as scratch and light-abrasion protection for the lens glass, not shock protection for the device body. Installation is adhesive-based and user-applied - clean the camera area before applying, press from one edge to avoid trapping air, and note that repeated removal and reapplication can weaken the adhesive or leave residue. As with any add-on applied directly to the device body, check that installation doesn't run counter to your original Oppo warranty terms before fitting it, and if you're at all unsure about handling the camera module area, having it applied by the seller or a phone accessory shop is a reasonable precaution.

Buying with confidence

Dastyab.pk ships this listing (SKU sc-prot-05745) across Pakistan and accepts returns within 7 days on unused, unopened items if the fit isn't right. Compatibility here is checked against the Oppo A3X's actual camera placement and body dimensions rather than a generic template, so what you receive is built for this device, not adapted from a similar-looking model.