Realme 12 Plus 5G Rear Camera Lens Protector, 9H Flexible, Verified Fit

About this product

This rear camera lens protector is built specifically for the Realme 12 Plus 5G, the 2024 model carrying a triple rear camera array of 50MP OIS main lens, 8MP secondary, and 2MP macro sensor. The tempered surface is rated 9H on the pencil-hardness scale, per the product specification, and uses a flexible edge that conforms to the raised camera housing rather than sitting as a rigid flat disc. Because the Realme 12 Plus ships with a plastic back panel and plastic frame paired with a glass front, the adhesive is formulated to bond to that plastic housing without leaving a residue ridge around the lenses. It is a targeted accessory: it protects the camera glass, not the rest of the back panel or the display.

• 9H hardness-rated surface, flexible construction to hug the curved camera bump
• Cutouts matched to the 50MP OIS + 8MP + 2MP triple-lens cluster
• Thin-film profile designed not to interfere with autofocus or OIS stabilization
• Compatible with all three retail colorways: Woodland Green, Navigator Beige, Sunrise Blue
• Leaves the NFC antenna area on the plastic back unobstructed for tap-to-pay use

How it fits your Realme 12 Plus

The Realme 12 Plus measures 162.2 x 74.7 x 7.9mm and weighs 188g, and the lens cutouts on this protector are cut to that exact camera module footprint rather than a generic circle: align it against the housing edge and the three lens rings, 50MP OIS, 8MP, 2MP, should drop into place without covering glass. Because the phone's back is plastic rather than glass or metal, the protector's adhesive backing is calibrated for that surface; on a metal or glass back it can behave differently, which is one reason this listing is scoped to this one device. This is strictly a camera-glass accessory: it does not extend to the USB-C charging port at the base, the side-mounted volume and power buttons, or the 6.70-inch AMOLED display up front, all of which stay exactly as before installation. The front screen already carries Corning Gorilla Glass 5 from the factory, and the IP54 splash resistance rating on this phone depends partly on the seals around the camera housing staying intact, so a poorly seated protector edge is worth avoiding.

What you should know

This listing covers the Realme 12 Plus 5G, 2024 model, only; it is not sized for the Realme 12, Realme 12 Pro, Realme 12 Pro+, or Realme 12x, whose camera housings and lens spacing differ even though the names look similar. A camera lens protector is cosmetic-and-scratch protection, not shock or impact protection: it will resist surface scuffs and fine scratches from keys or grit in a pocket but will not meaningfully cushion the lens glass in a hard drop onto a corner. Installation is a peel-and-place process you can do yourself, but on a 2024-model device that may still carry manufacturer warranty, applying any adhesive accessory to the camera housing is worth doing carefully; if you are not confident aligning it, ask us or a service center rather than forcing it once the adhesive has set. Once applied and the backing has bonded, it is not designed to be removed and reused cleanly.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items if this turns out not to be the fit you need, and we ship across Pakistan. This listing is written and checked against the Realme 12 Plus's actual camera and body specifications rather than generic accessory copy, so what you see here is what the cutout is measured against.