Sharp Aquos R6 Front Hydrogel Jelly Screen Protector - Verified Fit

About this product

This is a full-front hydrogel jelly film made specifically for the Sharp Aquos R6, a 2021 flagship built around a 6.60-inch Pro IGZO OLED panel running at 2730x1260 resolution with a 240Hz refresh rate. The soft TPU-based hydrogel material is cut to the exact curvature and edge profile of this display, so it lays flat against the glass without the white halo or lifted edges you get from rigid tempered glass on a panel this size. Because the Aquos R6 uses an ultrasonic in-display fingerprint sensor (Qualcomm 3D Sonic Max) rather than an optical one, a thin hydrogel film is the more sensor-friendly option compared to thicker glass, since it doesn't interfere with the sensor's ultrasonic read-through.

• Cut for the 6.60-inch OLED panel and 2730x1260 resolution of the Aquos R6, edge to edge
• Self-healing surface that reduces the appearance of fine daily scratches over time
• Thin enough to preserve touch response and the accuracy of the 3D Sonic Max fingerprint sensor
• Flexible film contours to the phone's curved glass edges instead of sitting flush like glass
• Leaves the 12.6MP front camera and earpiece area unobstructed

How it fits your Sharp Aquos R6

The Aquos R6 measures 162 x 74 x 9.5mm and weighs 207g, with a glass front and back held by an aluminum frame - a build where a snug, edge-matched front film matters, since any protector cut even slightly off will leave visible gaps along the 74mm-wide chassis. This jelly protector is shaped to that footprint, with the cutout for the 12.6MP front camera positioned correctly so the lens stays clear while the rest of the panel, including the area over the ultrasonic fingerprint sensor, stays covered. It does not touch the 20MP 1-inch Leica rear camera module, the USB-C charging port, or the phone's IPX5/IPX8 water-resistance seals on the frame, since it is a front-only screen film and does not extend to the back or sides. The hydrogel layer itself adds no water resistance - that rating belongs to the device's factory seals - but it does add a sacrificial surface over the OLED glass that takes daily scuffs instead of the screen.

What you should know

This listing covers the Sharp Aquos R6 only - it is not sized for the Aquos R7, Aquos sense6, Aquos zero6, or any other Aquos-series phone, since those models differ in screen dimensions and camera placement even where names look similar. A hydrogel film like this is a scratch and light-scuff layer, not shatter or impact protection; it will not stop the OLED glass from cracking under a hard drop the way a tempered glass layer might. Installation is a wet-apply process (spray solution, align, squeegee out air bubbles) rather than a peel-and-stick job, and a poor first application can leave dust or streaking under the film - going slowly and following the included instructions matters more with hydrogel than with glass. As with any adhesive film applied directly to the display, installation is done at the owner's own care and does not involve opening the device, but Dastyab.pk does not warranty user-installation errors such as trapped dust or misalignment.

Buying with confidence

Dastyab.pk accepts returns within 7 days on unused, uninstalled items, so you can check the fit against your Aquos R6 before applying it. We deliver across Pakistan, and this listing (SKU sc-prot-05783) is matched against the Aquos R6's actual screen dimensions and hardware layout rather than a generic template.