Tecno Camon 20 Rear Back Body Housing Replacement Battery Door, Verified Fit, Blue

About this product

This is a rear back body casing (battery back door) built as a replacement housing for the Tecno Camon 20, finished in Blue. It is designed to swap out the phone's factory plastic back panel — the Camon 20 ships with a glass front and plastic back and frame — restoring the exterior after cracks, deep scratches, or a failed battery door clip. Because the Camon 20 measures 162.9 x 74.9 x 7.8mm and weighs 182g, this housing is molded to that exact footprint so the device retains its original hand feel and doesn't pick up extra bulk or thickness once fitted. It is a body panel, not an add-on cover, so precision at the camera cutout and edge seams matters more than it would with a snap-on case.

• Molded to the Camon 20's 162.9 x 74.9 x 7.8mm chassis dimensions
• Camera window cut for the 64MP + 2MP + QVGA triple rear array
• Finished in Blue, styled close to the factory Serenity Blue option
• Edge lip designed to seat against the plastic mid-frame without gapping
• Side openings positioned for the physical volume and power buttons
• Replaces a damaged or missing original back door, not the internal battery itself

How it fits your Tecno Camon 20

Fit is specific to this one device: the camera cutout is shaped for the Camon 20's triple rear camera, a 64MP main sensor paired with a 2MP depth unit and a QVGA lens, so the lens ring, flash, and RGBW sensor sit flush rather than peeking out from an off-centre hole. The lower edge is cut for a USB-C charging port, matching the Camon 20's USB-C connector supporting 33W charging — not Micro-USB, so this panel will not line up correctly on older Camon models with a different port. Because the Camon 20's screen is a 6.67-inch AMOLED panel protected by Gorilla Glass 5 and sits on a separate glass front assembly, this back door has no effect on screen protection; it only closes up the rear housing around that glass front and the plastic frame. At 182g and 7.8mm thick, a correctly seated door keeps the phone's balance and grip unchanged from stock, with side buttons still registering with a firm, unmuffled click.

What you should know

This listing covers the Tecno Camon 20 specifically — it is not sized for the Camon 20 Pro, Camon 20 Premier, or Camon 19 series, which use different dimensions and camera layouts, so please confirm your exact model before ordering. This is a cosmetic and structural rear housing, not a screen protector or impact case: it restores the back panel's appearance and closes the chassis, but it does not add drop cushioning or waterproofing beyond what the original Camon 20 design offered. Fitting a replacement back door involves opening the phone chassis, disconnecting the battery, and reseating internal clips and adhesive, so we recommend having it installed by a qualified phone repair technician rather than doing it yourself, and note that opening the device may affect any remaining manufacturer warranty. Handle the fingerprint and camera ribbon cables with care during disassembly, as the Camon 20's in-display fingerprint sensor and camera module are connected to the frame this door sits around.

Buying with confidence

Dastyab.pk ships this Tecno Camon 20 back door nationwide across Pakistan and accepts returns within 7 days on unused, uninstalled items. The listing is written against the Camon 20's published specifications — its dimensions, camera configuration, and port type — so you can check fit before you buy rather than after.