Vivo Y19 Rear Body Panel Housing With Camera Lens, Verified Fit - Black

About this product

This is a full rear complete body casing housing for the Vivo Y19 (released 2019), replacing the entire back panel and mid-frame that cover the phone's plastic back and plastic frame construction. It is built to match the Y19's 162.15 x 76.47 x 8.89mm dimensions and 198.5g weight, so the housing sits flush against the display assembly without adding noticeable bulk. The housing includes an integrated camera lens cutout aligned to the Y19's triple rear camera module (16MP + 8MP + 2MP), along with the pre-cut opening for the rear-mounted fingerprint sensor and branding cutouts matching the original Magnetic Black finish. Because this is a complete body housing rather than just a snap-on back cover, it also includes the mid-frame section that holds the dual Nano-SIM and dedicated microSD card tray, so the card slot lines up exactly where it sits on the original Y19 frame. The 3.5mm headphone jack cutout on the bottom edge is also pre-punched to the stock position, alongside the primary and secondary microphone holes.

• Matches the Y19's 6.53-inch display footprint at the edge where the housing meets the display assembly
• Camera cutout sized for the 16MP+8MP+2MP triple-lens array, not a single or dual-lens layout
• Cutout positioned for the micro-USB charging port at the base, not USB-C
• Side rails cut for volume and power buttons in their factory positions, plus the dual Nano-SIM and microSD tray slot
• Compatible with the Y19's 5000mAh battery compartment depth
• Finished in Black to match the Magnetic Black colorway

How it fits your Vivo Y19

Because the Y19 uses a plastic back with a plastic frame rather than glass or metal, the replacement housing snaps and screws into the same mounting points as the original assembly, and the fit tolerance is built around the phone's exact 8.89mm thickness. The triple camera cutout lines up with the 16MP main, 8MP, and 2MP lenses so all three sit level with the housing surface rather than recessed or proud of it, which matters for a phone that doesn't have raised camera protection built into the frame. The lower cutout matches the micro-USB port location precisely, and the speaker grille, headphone jack, and microphone holes are punched to the Y19's factory layout. Since the Y19 has no official water or dust resistance rating, this housing does not add sealing beyond what the original plastic back provided; it restores the exterior only, not any ingress protection. The SIM and microSD tray opening is sized for the Y19's dual Nano-SIM plus dedicated microSD layout, not a hybrid slot.

What you should know

This housing is made specifically for the Vivo Y19 and will not fit the Y19s, Y17, or Y15 despite similar naming, since camera placement, screw points, and frame dimensions differ across those models. It replaces the rear cosmetic and structural shell with an attached camera lens cover, but it does not include the battery, motherboard, fingerprint sensor module, or any internal electronics. This is a cosmetic and structural repair part, not a shockproof or ruggedized case; it will not add drop protection beyond what the original stock back panel offered. Installation involves opening the phone and transferring internal components (battery, camera modules, sensors, SIM tray) from the old housing to the new one, which we recommend leaving to a phone repair technician, as improper handling of the battery or camera flex cables can damage the device and may void any remaining manufacturer warranty.

Buying with confidence

Dastyab.pk ships this Vivo Y19 rear housing across Pakistan and accepts returns within 7 days on unused, uninstalled items. The listing is built directly against the Y19's documented specifications, not a generic "compatible with Vivo" description, so what you see matches the model you own.